Page 1
Allyn Transitional Stand Alone Filtration Faucet FF-102...
Page 2
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE...
Make sure you have all necessary parts by checking the diagram and · parts list. If any part is missing or damaged, please contact Kraus · Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure.
Page 4
Diagram and Parts List A. Faucet Assembly B. Flange C. Rubber Washer D. Metal Washer Mounting Nut Connector 3/8" G. Connector 1/4" For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help:...
Faucet Dimensions 4 1/2” [115mm] 1 3/4” 2 3/8” [45mm] [61mm] Installer Tip: Shut off main water supply before installing new faucet.
Page 6
Step 1: Preparing for installation Remove the rubber washer (C), metal washer (D), and mounting nut (E) from the end of the stud. Step 2. Installing the faucet assembly Place the faucet assembly (A) through the selected hole in the sink or countertop.
Page 7
Step 3. Connecting the quick connect adaptor and water line Thread the quick connect adaptor (F) onto the end of the faucet assembly (A) stud, and tighten securely using a wrench. Connect the 3/8 in. water line from the filtration system by pushing the line into the connector (F).