fantastic furniture Amirah Bed Single Quick Start Manual page 7

Step 5

You will need

4 x Bolts

Phillips Head

(H10)

Screwdriver

This is how a cam nut works........

The head of the cam bolt goes

into the open mouth of the cam

nut. You then turn the cam nut

so it tightens over the bolt.

Attach the side rails (P2 & P3) to the foot board (P4).

Align the dowels (H3) in the side panels with the holes on the foot board (P4).

Turn the cam nuts (H2) on the side panels (P2 & P3) clockwise with a phillips head

screwdriver to lock into position.

Then fix the side rails (P2 & P3) to the foot board (P4) with 4 x bolts (H10) using a phillips

head screwdriver.

Step 6

You will need

1 x Allen Key

4 x Small Screws

(H1)

(H7)

Attach the metal centre support (P6) to the head board (P1) and foot board

(P4) with 4 x small screws (H7) using an allen key.

Ensure all bolts are fully tightened.

fantasticfurniture.com.au

H10

Page 7

Table of Contents