Table of Contents
Advertisement
Interrupt Mode
The Interrupt mode enables you to interrupt the reserved or current job that is
1
printing long enough to make higher priority copies. This mode is useful if you need
to make a rush copy during a long copy job.
NOTE
You can make interrupt copies when the machine is ready to scan.
1
COPY
Interrupt
2
3
1-20
Interrupt Mode
Press [COPY].
lights.
COPY
Press [Interrupt].
If you want to make copies after changing the Department ID while Department
ID Management is enabled, press
password. (See Chapter 2, "Basic Operations," in the Reference Guide.)
(Interrupt) lights.
NOTE
If you press
(Interrupt), the current job being output is not interrupted until the
interrupt copy starts printing.
Place your original, and set the desired copy modes.
NOTE
To cancel the Interrupt mode, press
to select the reserved copy job © press
(ID) © enter the Department ID and
ID
(Stop) © press
F2
(CANCEL).
F4
F3
(M) or
(L)
Advertisement
Table of Contents
