Table of Contents
Advertisement
F2
3
F1
4
F2
F3
3
F4
OK
F3
5
F4
OK
3-6
Margin Mode
Press [F2] (MARGIN).
Press [F1] (LEFT MARGIN), [F2] (RIGHT MARGIN), [F3] (TOP
MARGIN), or [F4] (BOTTOM MRGN) to specify the type of
margin © press [OK].
The Margin Width setting menu appears for the margin type you selected.
Press [F3] (–) or [F4] (+) to set the margin width (1 mm to 20
mm) © press [OK].
You can also use the numeric keys to enter the margin width, and
clear the value.
If you enter a value outside the setting range, an error tone sounds. Enter a value
within the setting range.
The selected mode is set, and the Copy Basic Features screen appears.
NOTE
The default setting is '10 mm'.
(Clear) to
C
Advertisement
Table of Contents
