Table of Contents
Advertisement
Using Shortcut Keys
The shortcut keys enable you to assign the most frequently used copy functions to
the shortcut keys, and to call up these functions with a single key press when
making copies. You can assign up to four copy modes to the shortcut keys.
NOTE
•
The default settings for each shortcut key (1 to 4) are as follows:
- 1: Reduce
- 2: Enlarge
- 3: Two-Page Separation
- 4: Frame Erase
•
The following modes can be assigned to the shortcut keys:
- Copy Ratio, Exposure, Margin, Frame Erase, Two-Page Separation, Image
Combination, Staple Sort (only when the Finisher-L1 (optional) is attached), Paper Size
for the Stack Bypass, and Different Size Originals
•
This machine comes with a name label for each shortcut key. Write the name of the
mode on the label, and affix it to the operation panel underneath the corresponding
shortcut key.
Assigning Functions
Follow the procedure described below to assign the most frequently used copy
modes to the shortcut keys.
Additional Functions
1
Press [Additional Functions] © press [F3] (M) or [F4] (L) to
highlight <02 COPY SETTINGS> © press [OK].
F3
The COPY SETTINGS menu appears.
F4
OK
Using Shortcut Keys
4-15
4
Advertisement
Table of Contents
