TriangleTube PGRKIT30 Assembly Instructions

Hmg delta classic, blower & capacitor replacement kit

HMG Delta CLASSIC

Blower & Capacitor Replacement Kit

Kit Part Numbers: PGRKIT30

Parts List

1- Blower

2- Capacitor

WARNING

Indicates a potentially hazardous situation

which, if ignored, can result in serious

injury or substantial property damage.

WARNING

Failure to follow instructions below can result

in severe personal injury or damage if ignored.

•

Instructions are for a qualified installer/ ser-

vice technician.

•

Read all instructions before proceeding.

•

Follow instructions in proper order.

NOTICE

Indicates special instructions on installa-

tion, operation or maintenance, which are

important to equipment but not related to

personal injury hazards.

WARNING

For your safety, turn off electrical power

supply at service panel before proceeding to

avoid possible electrical shock hazard.

Failure to do so can cause severe personal

injury or death.

Table of Contents

Do you have a question about the PGRKIT30 and is the answer not in the manual?

Page 1 HMG Delta CLASSIC Blower & Capacitor Replacement Kit Kit Part Numbers: PGRKIT30 Parts List 1- Blower 2- Capacitor WARNING NOTICE Indicates special instructions on installa- Indicates a potentially hazardous situation tion, operation or maintenance, which are which, if ignored, can result in serious important to equipment but not related to injury or substantial property damage.
Page 2 HMG Delta CLASSIC Blower & Capacitor Replacement Kit Removal of Blower Assembly WARNING 1. Ensure power to the unit has been disconnected prior to removal of the blower and capacitor. Inspect and ensure pilot hood assembly is free of damage. Replace as needed. 2.
Page 3 HMG Delta CLASSIC Blower & Capacitor Replacement Kit Installing Blower Assembly 8. Secure the burner assembly using the (2) 17mm mounting nuts located to the left and right side 1. Place the air inlet flange and retainer ring onto of the windbox. the new blower and secure with screws.