fantastic furniture Pod Tallboy Manual page 6

Step 3
You will need
Phillips Head
8 x Cam Bolts
Screwdriver
(H3)
Attach 8 x Cam Bolts (H3) to Left & Right Side Panel (P3 & P4) by tightening with the Phillips
Head Screwdriver.
Step 4
You will need
6 x Dowels 4 x Cam Nuts
(H1) (H4)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 4 x Cam Nuts (H4) into Rails (P8 & P6 x 2 ) .
Insert 6 x Dowels (H1) into Rails (P6 x 2 & P7 x 2) as shown.
Rotate the cam nuts so the arrows point towards the incoming
cam bolts. Attach Rails (P6 x 2 & P7 x 2 & P8) to Left Side
Panel (P3) by tightening all cam nuts with the Phillips Head Screwdriver.
fantasticfurniture.com.au fantasticfurniture.com.au
(P4)
(P6)
(P7)
(P3)
(P8)
(P6)
(P7)
(P3)
Page 6