Advertisement
Step 3
You will need
7 x Dowels
9 x Cam Nuts
(H1)
(H4)
2 x Round
Phillips Head
Screws (H18)
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 7 x Dowels (H1) and 9 x Cam Nuts (H4) into Shelf
Panels & Rails (P4x2, P5&P8, P9) as shown. Rotate the nuts so
the arrows point towards the incoming bolts. Attach Shelf Panels &
Rails (P4x2,P5&P8, P9) to Left Side Panel (P2) by tightening all nuts with the Phillips Head
Screwdriver. Attach the end of Iron Bar (P18) to Left Side Panel (P2) with 2 x Round Screws (H18).
Step 4
Slide Back Panels (P6x2, P7) into the grooves of Shelf Panels & Rail (P4x2, P5 & P8).
fantasticfurniture.com.au
(P4)
H4
H1
(P2)
(P6)
(P6)
(P4)
(P4)
(P5)
(P4)
(P5)
(P18)
(P9)
H18
(P7)
(P8)
(P8)
Page 6
Advertisement
