Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture Forbes Credenza File Cabinet
Summary of Contents for fantastic furniture Forbes Credenza File Cabinet
- Page 1 Version 1.0 Forbes Credenza File Cabinet www.fantasticfurniture.com.au...
- Page 2 Enjoy Your purchase from Australia’s Best Value Furniture Store PAGE 2 www.fantasticfurniture.com.au...
-
Page 3: Assembly Checklist
Assembly checklist Read through the instructions carefully Make sure you have all the requires tools. before you begin Never use power tools unless instructed. Unless instructed, do not fully tighten Identify and lay out all of the components before you begin assembly. screws until the item is fully assembled. -
Page 4: What You Need
What you need To assemble the product Parts List Base Panel (P1); Left Side Panel (P2); Right Side Panel (P3); Left Side Division (P4); Right Side Division (P5); Left And Right Back Panel (P6); Centre Back Panel (P7); Adjustable Shelves (P8); Fixed Middle Shelf (P9);... - Page 5 Hardware 8 x CONFIRMAT SCREW 12 x CONFIRMAT SCREWS 24 x 13mm C/S SCREWS CAPS (H3) (H2) (H1) 62 x WOODEN DOWELS 2 x PAIRED DRAWERS (H5) 2 x GLUE RUNNERS (H6) (H4) 8 x EURO SCREWS 24 x 5/8 PAN HEAD SCREWS 6 x CASTER WHEEL (H7) (H9)
- Page 6 STEP 1 You will need: 4 x Hinge Block (H12) 1 x Glue (H4) FACING FACING FRONT REAR OF 8 x Wooden Dowels (H5) OF UNIT UNIT When attaching the hinge block (H12) ensure that it is positioned as shown above. Insert a small amount of Glue (H4) into the holes provided in the top of panels P2 &...
- Page 7 STEP 2 You will need: 4 x Drawer runners (H6) 1 x Glue (H4) P4 & P5 8 x Euro screws (H7) 16 x Wooden Dowels (H5) Insert a small amount of Glue (H4) into the holes provided in the top and bottom of panels P4 &...
- Page 8 STEP 3 You will need: 1 x Glue (H4) 14 x Wooden Dowels (H5) 4 x Confirmat Screws (H2) 4 x Confirmat Screw Caps (H3) GLUE ALL DOWEL JOINTS Insert a small amount of Glue (H4) into the holes provided on both sides of panel (P7 and P9) Insert the Wooden Dowels (H5) into the holes that you have just put glue into and tap in with a mallet.
- Page 9 STEP 4 You will need: 1 x Glue (H4) 8 x Wooden Dowels (H5) 4 x Confirmat Screws (H2) GLUE ALL DOWEL JOINTS Insert a small amount of Glue (H4) into the holes provided in the sides of panel (P1) Insert the Wooden Dowels (H5) into the holes that you have just put glue into and tap in with a mallet.
- Page 10 STEP 5 You will need: 1 x Glue (H4) 16 x Wooden Dowels (H5) GLUE ALL DOWEL JOINTS Insert a small amount of Glue (H4) into the holes provided in the sides of panels (P6) Insert the Wooden Dowels (H5) into the holes that you have just put glue into and tap in with a mallet.
- Page 11 STEP 6 You will need: 1 x Glue (H4) 4 x Confirmat Screws (H2) 4 x Confirmat Screw Caps (H3) GLUE ALL DOWEL JOINTS Insert a small amount of Glue (H4) into the holes provided on panel P2 & P3 Align dowels on P1 &...
- Page 12 STEP 7 You will need: 1 x Glue (H4) GLUE ALL DOWEL JOINTS Insert a small amount of Glue (H4) into the holes provided on panel P10 Align dowels on P2, P3, P4 & P5 with holes on P10 and bring together PAGE 12 www.fantasticfurniture.com.au...
- Page 13 STEP 8 You will need: 6 x Castor Wheel (H8) 24 x 5/8 Pan Head Screws (H9) Carefully place the unit onto its back Using the holes provided in the bottom of P1, fix 6 x Castor Wheels (H8) onto P1 using the 5/8 Pan Head Screws (H9) PAGE 13 www.fantasticfurniture.com.au...
- Page 14 STEP 9 You will need: 2 x Drawer runners (H6) 1 x Glue (H4) 4 x 13mm C/S screws (H1) Insert a small amount of glue into the dowel holes provided on the Drawer Front (P13) and the Drawer Back (P16). Align dowels on drawer side (P15) with holes on Drawer Front (P13) and bring together.
- Page 15 STEP 10 You will need: 2 x Drawer runners (H6) 1 x Glue (H4) 4 x 13mm C/S screws (H1) 2 x File Rods (H9) Insert a small amount of glue Into the dowel holes provided on the File Drawer Front (P14) and the File Drawer Back (P17) Align dowels on Drawer side (P15) and File Rod (H9) with holes on File Drawer Front (P14) and bring together.
- Page 16 STEP 11 You will need: 2 x Forbes Handle (H13) 4 x 13mm C/S Screws (H1) 8 x Shelf Supports (H11) Using the holes provided on the back of both Drawer Fronts, fix Forbes Handle (H13) to the top of the Drawer Fronts using the 13mm C/S Screw (H1) Using the holes provided in Panels P2, P3, P4, P5, insert the self supports into the holes making sure that you use the corresponding hole on the...
- Page 17 STEP 12 You will need: 4 x Hinge (H10) 13mm C/S Screw (H1) 8 x 13mm C/S Screw (H1) 2 x Forbes Handle (H13) Hinge (H10) P11 & P12 Snap-On System The hinge arm is positioned on the mounting plate and simply clipped on from front to back.
- Page 18 STEP 13 PAGE 18 www.fantasticfurniture.com.au...
- Page 19 Your Unit Is Now Complete In the interest of our environment Please dispose of all packaging thoughtfully. PAGE 19 www.fantasticfurniture.com.au...