Table of Contents
Advertisement
Available languages
Available languages
Programming the user interface
It is possible to assign the following parameters to each time period.
-
-
-
-
: room temperature (
: domestic hot water temperature (
Here's an example of a programming using the factory-set periods and Touch 'N' Go options.
-
-
-
-
Pre-set Period
Start Time
6:00
8:00
14:00
20:00
Pre-set Period
Start Time
2:00
4:00
8:00
22:00
Here's how to set your personal time periods to select the
time periods for the other boards/zone, use the virtual zoning
concept and do the same procedure.
1.
Open the lid.
2.
Press the days (
) button.
You will see 1 to 7 flashing on the display.
3.
Select one of the options (1 to 7 , 1 to 5 , 6 to 7 or
individual day : 1, 2, 3, 4, 5, 6, 7) by pressing the days
(
) button.
4.
When you have selected one of the options, press the
period (
) button. P1 will flash on the display.
5.
Select the desired zone by pressing the zone (
button repeatedly.
6.
To change the hours in P1, press the start time
(
) button.
7.
You will see the hours flashing on the screen. Press
the up or down button to select the desired one.
8
/
/
), Zone mode (ON/OFF)
/
), booster heater (ON/OFF), master mode (ON/OFF)
Period Number
P1
P2
P3
P4
Domestic hot water
Period Number
P1
Home (
P2
Home (
P3
Home (
P4
Away (
)
Option for Each Period
Home (
)
Away (
)
Home (
)
Sleep (
)
Booster Heater
option
allowed
NO
)
YES
)
NO
)
NO
)
Zone Mode
ON
ON
ON
ON
Silent Mode
NO
NO
NO
NO
Advertisement
Chapters
Table of Contents
