rough country 1118517 Quick Start Manual

Soft roll up truck bed cover

Advertisement

Quick Links

SOFT ROLL UP TRUCK BED COVER

WARRANTY

Our company warrants this product to be free of defects in
material and workmanship at the time of purchase by the
original retail consumer. We disclaim any other warranties,
express or implied, including the warranty of fitness for
a particular purpose or an intended use. If the product is
found to be defective, we may replace or repair the product
at our option, when the product is returned prepaid, with
the proof of purchase. Alteration to, improper installation, or
misuse of this product voids the warranty. Our company's
liability is limited to repair or replacement of products found
to be defective, and specifically excludes liability for any
incidental or consequential loss or damage.
ATTENTION!
1. Do not place objects on or against cover or framework.
2. Do not tie cargo to cover framework.
3. Never allow children or pets to occupy pickup box while
cover is closed.
4. Cover is not airtight. Special care is required to keep
cargo clean and dry.
5. Fabric cover won't prevent theft of contents inside truck
box.
6. Cover must be rolled fully open and secured with retainer
straps when towing vehicle backwards.
7. Opened cover must be secured with both retainer straps
when driving vehicle.
8. Cover must NEVER be rolled partially open while
operating vehicle.
9. Cover must be rolled fully open and secured with retainer
straps if any part of the truck bed cover is worn or
damaged.

OWNER/USER RESPONSIBILITIES

It is the responsibility of the owner/user to read this manual and
comply with the operating procedures. The owner/user is also
responsible for inspecting their truck bed cover system, and for
having parts repaired or replaced when worn or damaged.
Failure to follow safety instructions and warning labels could result
in failure of your cover system and/or personal injury.

MESSAGES TO INSTALLER

• Always wear safety glasses and/or other necessary protective
equipment when installing your truck bed cover system.
• These instructions are complete for most pickup models.
Additional instructions are included, if required for your pickup.
Please read entire manual before installing your truck bed cover
system.

COVER MAINTENANCE

Vinyl cover can be hand washed with mild soap and water or cleaned
in a car wash. Thoroughly rinse cover to remove any soap residue.
Cover can be treated with any vinyl protectant made for ttruck bed
covers. Never use any vinyl conditioners (ie, Armor
All®) that contain silicone, petroleum, or citrus
based products on your truck bed cover as they
may crack and shrink the vinyl.
DIRECT ALL WARRANTY CLAIMS TO:
Before returning any item please call
1-800-222-7023 or email:
support@roughcountry.com to receive instructions
and Return Goods Authorization (RGA) number.
Please have your order number and full contact in-
formation available, along with the reason for your
return.
WARNING
!
Tighten clamps securely on side rails before driving
vehicle, to prevent cover from blowing off.
-1-
P/N 1118517 Rev C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1118517 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for rough country 1118517

  • Page 1 SOFT ROLL UP TRUCK BED COVER P/N 1118517 Rev C WARRANTY OWNER/USER RESPONSIBILITIES It is the responsibility of the owner/user to read this manual and Our company warrants this product to be free of defects in comply with the operating procedures. The owner/user is also...
  • Page 2 Components (2x) H (2x) D (6x) E (2x) (2x) Tools Required 3/8 Ratchet 1/2” SAE Socket 9/16” SAE Socket Attach the foam weather seal pieces, Item “J”, to the ends of each side rail. Peel and Stick Align the profile of each seal to the profile of the end caps.
  • Page 3 With Tailgate Closed, Position Side Rail Compressing End Seals Equally Between Cab and Tailgate. End Seal Compressed At Tailgate. End Seal Compressed At Cab. Install three clamps per driver and passenger side. 4”-6” If 4”-8” If Possible Possible Attention: Clamp placement depends on the trucks rear 1/2”...
  • Page 4 SETTING TENSION ADJUSTMENT BLOCKS Cover tension is controlled by a four position adjustable block. To start, place blocks in position shown below, with 4 on top and closest to front header. Secure blocks with hitch pin in #2 hole, this is the least amount of tension.
  • Page 5 Unhook and unroll cover to the tailgate. NOTE: Preferred method to close cover. Roll cover closed then close tailgate. Seal will be inside the tailgate. If tailgate has a key lock, truck bed cover is secured until tailgate is unlocked and opened. NOTE: Secure hook fastener and loop fastener along entire length To unlatch Pull Toggle.
  • Page 6 REPLACEMENT PARTS Replacement Cover Hook Strip 23 1705404 Rear Header End Plug LH Front Header 13 1703332 Hitch Pin Rear Header 3 1705310 Front Header End Plug RH 14 1706362 Clamp Assembly (6) 25 1706421 Side Rail End Plug LH 4 1705311 Front Header End Plug LH Side Rail, Passenger’s Side 26 1706422 Side Rail End Plug RH...

Table of Contents