Installing A Dimm Or Dimm Blank; Memory Performance - Cisco UCS X210c M6 Installation And Service Note

Servicing a Compute Node

Installing a DIMM or DIMM Blank

To install a DIMM or a DIMM blank (UCS-DIMM-BLK=) into a slot on the compute node, follow these
steps:
Step 1
Open both DIMM connector latches.
Step 2 Press evenly on both ends of the DIMM until it clicks into place in its slot.
Ensure that the notch in the DIMM aligns with the slot. If the notch is misaligned, it is possible to damage the
Note
DIMM, the slot, or both.
Step 3
Press the DIMM connector latches inward slightly to seat them fully.
Step 4 Populate all slots with a DIMM or DIMM blank. A slot cannot be empty.
Figure 10: Installing Memory

Memory Performance

When considering the memory configuration of the compute node, there are several things to consider. For
example:
Cisco UCS X210c M6 Compute Node Installation and Service Note
Installing a DIMM or DIMM Blank
51