Installing a DIMM or DIMM Blank
Installing a DIMM or DIMM Blank
To install a DIMM or a DIMM blank (UCS-DIMM-BLK=) into a slot on the blade server, follow these steps.
Procedure
Step 1
Open both DIMM connector latches.
Step 2
Press evenly on both ends of the DIMM until it clicks into place in its slot.
Note
Step 3
Press the DIMM connector latches inward slightly to seat them fully.
Step 4
Populate all slots with a DIMM or DIMM blank. A slot cannot be empty.
Figure 15: Installing Memory
Cisco UCS B200 M5 Blade Server Installation and Service Note
36
Ensure that the notch in the DIMM aligns with the slot. If the notch is misaligned, it is possible to
damage the DIMM, the slot, or both.
Servicing a Blade Server