Page 1
MEK 4C 101103105107109111102021110025108024042106023061104022041100020040060001 Bruksanvisning Manuel d’instructions Brugsanvisning Gebruiksaanwijzing Bruksanvisning Instrucciones de uso Käyttöohjeet Istruzioni per l’uso Instruction manual Manual de instruções Betriebsanweisung Ïäçãßåò ÷ñÞóåùò 456 679- - 001 97.01.15 Valid from Serial NO 623- - XXX- -XXXX...
Page 4
Esab Welding Equipment AB, S--695 81 Laxå, Sweden, gives its unreserved guarantee that Wire feed unit MEK 4C from serial number 623 complies with standard EN 60974--1, in ac- cordance with the requirements of directive 73/23/ EEA and addendum 93/68/ EEA and standard EN 50199 in accordance with the requirements of directive 89/336/ EEA and ad- dendum 93/68/ EEA.
INTRODUCTION The MEK 4C is an encapsulated wire feed unit with four roller feed. The unit provides space for a 300 mm diameter wire reel and has a built--in positioner. For a wire feed unit to be complete it must be equipped either with a turnable, counterbalance device or a carriage.
OPERATION CONNECTION 1. Nipple, cooling water (only certain models) 2. Nipple, gas connection 3. Connector, control cable 4. Adapter, welding current 5. Connector, remote control (activated automatically on connection of remote) 6. Nipple, cooling water (only certain models) 7. Adapter, welding torch 8.
MAINTENANCE INSPECTION AND CLEANING Regularly maintenance is important for reliable and safe operations. Cleaning and replacement of the wire feed mechanism’s wear parts should take place periodically to ensure trouble free wire feed. Note that an excessive pressure setting can result in abnormal wear on the pressure roller, feed roller and wire liner Torch Regulary blow the wire liner and clean the gas shroud.
Page 8
ACCESSORIES 0456 528 880 L=1,7m 0469 789 880 0456 528 885W L=1,7m 0469 786 880 0156 654 893 0456 693 880 0469 792 881 WARNING! There is a risk of tipping if the wire feed cabinet is fitted with a counterbalance arm. Secure the equipment, especially if used on an uneven or sloping surface.
Need help?
Do you have a question about the MEK 4C and is the answer not in the manual?
Questions and answers