Advertisement
Quick Links
Assembly and Use Instructions
JET MAT
Model # MSC-5019
- Mature adult supervision is required at all time during use.
- Only for domestic use.
For customer service or replacement parts, please call 1-866-370-2131 Monday
through Friday 9am-5pm EST, visit our website: www.sportspowerltd.net or
email: customerservice@sportspowerltd.net
RETAIN THIS MANUAL FOR FUTURE REFERENCE
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SPORTSPOWER JET MAT MSC-5019
Summary of Contents for SPORTSPOWER JET MAT MSC-5019
- Page 1 Assembly and Use Instructions JET MAT Model # MSC-5019 - Mature adult supervision is required at all time during use. - Only for domestic use. For customer service or replacement parts, please call 1-866-370-2131 Monday through Friday 9am-5pm EST, visit our website: www.sportspowerltd.net or email: customerservice@sportspowerltd.net RETAIN THIS MANUAL FOR FUTURE REFERENCE...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS • This product is for household and family domestic use only – It is not for use in schools, playgrounds, rental or commercial use. • The product must be placed on a surface that is COMPLETELY FLAT AND LEVEL. If the ground is uneven, this could cause movement in the product that could cause product damage and/or serious injury. -
Page 3: Care And Maintenance
CARE AND MAINTENANCE • Make sure the anchors are fully secured and there are no tears or leaks on the product. • Product should be dried and stored immediately following use. Do not leave product exposed outdoors for extended periods as product will be damaged by external factors such as UV rays , rain and wind. - Page 4 Parts List Part Picture Description Quantity Number Jet Mat Controller Stakes...
- Page 5 Assembly Instruction Step 1. Unfold the product.
- Page 6 Assembly Instruction Step 2. Secure the product to the ground with stakes provided. NOTE: Ground stakes must be completely inserted into the ground.
- Page 7 Assembly Instruction Step 3. To assemble the controller, unscrew the battery lid then remove the battery rack and install eight D size batteries (not included). Then screw battery lid back in place.
- Page 8 Assembly Instruction Step 4. Unscrew the caps from controller and pass them through the water tubes located on the JET MAT.
- Page 9 Assembly Instruction Step 5. Push the clear tubes into the matching injector on the control unit. Make sure each tube is matched to the correct injector as labelled. Then screw the caps on tightly to the injector.
- Page 10 Assembly Instruction Step 6. Connect to water hose.
- Page 11 Assembly Instruction Step 7. Press the switch to activate the JET MAT. LED indicator will light up when product is on. -10-...
Need help?
Do you have a question about the JET MAT MSC-5019 and is the answer not in the manual?
Questions and answers