Advertisement
Quick Links
Advertisement
Related Manuals for MAY DACAPO
Summary of Contents for MAY DACAPO
- Page 1 DACAPO OPERATING MANUAL Deutsch / English / Français...
- Page 2 WARRANTY A 24 month warranty is granted on this parasol, including all operational parts. Warranty does not cover damage from improper use, strong winds or rust film on spoke joints. page 2 of 15 Stand 42-0244...
- Page 3 A GOOD CHOICE By purchasing a DACAPO, you have opted for a MAY side-post parasol of premium quality. To guarantee highest precision of workmanship in the processing of your new parasol, all metal components are manufactured on state-of-the-art CNC-controlled lathes and milling machines.
- Page 4 page 4 of 15 Stand 42-0244...
- Page 5 East position: parasol to a certain extent. recommended not recommended Damage caused by wind Your DACAPO parasol is not designed for comprehensive protection in severe weather conditions. When strong South position: winds arise, close the parasol immediately. We cannot recommended assume warranty or liability for damage caused by wind.
- Page 6 Remove the protective sleeve. a) Push cross arm to vertical pole. b) Push tube downwards. Push out cross arm (type DG), wind Release up cross arm (type DK). Attach and the strap. fasten star knob. Spread spoke. Open canopy as illustrated to minimize effort.
- Page 7 We cannot assume any liability canopy in position of your choice. Tighten knob in for damage due to improper opening clockwise direction. May require a nudge. and closing of the parasol. Deutsch / English / Français page 7 of 15...
- Page 8 Height adjustment (40 cm): Loosen upper clamping lever. Raise parasol to Up to position of your choice.Tighten upper clamp. 180° In case cross arm sticks, a thin coat of silicon may 360° be applied. page 8 of 15 Stand 42-0244...
- Page 9 OPERATING THE PARASOL DK, DACAPO with crank DG, DACAPO standard version Ball joint Deutsch / English / Français page 9 of 15...
- Page 10 Standard-length upper anchor tube Aligning: Align the parasol into the position required. Drilling: Drill the clearance hole for optional theft and anti-twisting locks as follows: Holes have been provided in the anchor foot for the anti-twisting mechanism. Use these as master/ guide holes and drill from both sides through the parasol pole, using a Ø...
- Page 11 THEFT AND ANTI-TWISTING LOCKS Extra-length upper anchor tube parasol pole Same procedure as with standard-length (page 10). DACAPO: height adjustment mechanism The parasol pole must be set at a height where the height adjustment mechanism spring adapter cannot get damaged through drilling.
- Page 12 Canopy Changing canopy Cleaning the canopy All our awning fabrics are made of high-quality Take off spoke system. Take allen wrench (size Clean canopy with a soft brush or with a high 6 mm) and unscrew ball pivot with 3 rotations. materials.
-
Page 13: Maintenance
As the spokes are made of and 7. To avoid scouring , place some soft, abrasion- spring steel, they may rust slightly. Use a resistant (foam) material between the clamp deruster to remove the rust film. All other Best storage place: a dry and sheltered inside and the parasol pole. - Page 14 SELF-HELP AND DIAGNOSIS IN THE CASE OF FAULTS Problem Solution Cross arm does not move properly. Clean cross arm and thinly grease the sliding surface with silicone spray. page 14 of 15 Stand 42-0244...
- Page 15 Deutsch / English / Français Stand 42-0244 Seite 15 von 15...
Need help?
Do you have a question about the DACAPO and is the answer not in the manual?
Questions and answers