Installation Procedure - Carmanah SPEEDCHECK-15 Replacement Manual

Radar speed signs

Hide thumbs Also See for SPEEDCHECK-15:

3.0 Installation Procedure

This guide is for installing a replacement radar into a SPEEDCHECK-15 system. Refer to the individual product

user manual for more details at support.carmanah.com. The images in this guide may differ from your

SpeedCheck radar speed sign. They are for illustrative purposes only.

ENSURE DEVICE IS COMPLETELY POWERED OFF SO THERE IS NO DANGER OF

ELECTRICAL SHOCK OR RISK OF DAMAGING EQUIPMENT.

1. Disconnect power to the SPEEDCHECK-15 sign by turning off the breaker or removing the fuse(s) in the

associated power cabinet.

2. Remove the two hex head screws, one on each side, holding the sign face to the radar enclosure.

3. Tilt the sign to the rear and lift to remove.

4. Lift window retainer clip and tilt window forward. Lift and remove window.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

SPEEDCHECK-15 RADAR REPLACEMENT GUIDE

customersupport@carmanah.com

carmanah.com

Table of Contents