HAMPTON BAY SUSSEX II AL694LED-BN Use And Care Manual page 12

Assembly — Hanging the Fan (continued)
8
Installing the canopy
WARNING: Make sure the tab on the mounting bracket (A)
properly sits in the groove in the hanger ball / downrod
assembly (D) before attaching the canopy (C) to the mounting
bracket (A) by turning the canopy (C) until it drops into place.
WARNING: The locking slots of the canopy (C) are provided
only as an aid to mounting. Do not leave the fan assembly
unattended until all four canopy mounting screws with lock
washers (FF) are engaged and firmly tightened.
□
Slide the canopy (C) up to the ceiling. Make sure you
have placed the wires safely into the outlet box.
□
Secure the canopy (C) to the mounting bracket (A)
with the four canopy mounting screws with lock
washers (FF) included with your fan.
□
Raise up canopy ring (B) and line up the four grooves
with the four screw heads on the canopy (C). Once
lined up, slide the canopy ring (B) and secure it to
the canopy (C) until snug.
FF
C
12
Outlet Box
FF
A
B