Hanging The Fan - HAMPTON BAY SUSSEX II AL694LED-BN Use And Care Manual

Assembly — Hanging the Fan
Installing the mounting bracket
4
to the electrical box
WARNING: To reduce the risk of fire, electric shock or
other personal injury, mount the fan only to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
□
Pass the 120-volt supply wires through the center
hole in the mounting bracket (A).
□
Attach the mounting bracket (A) on the outlet box by
sliding the mounting bracket (A) over the screws
provided with the outlet box. Note that the flat side of
the mounting bracket (A) is toward the outlet box.
□
Securely tighten the two mounting screws.
Hanging the fan to the mounting
5
bracket
□
Carefully lift the fan motor assembly (F) up to the
mounting bracket (A) and seat the hanger ball / downrod
assembly (D) in the mounting bracket (A) socket. Make
sure the tab on the mounting bracket (A) socket is
properly seated in the groove in the hanger ball /
downrod assembly (D). This will help to balance the
ceiling fan.
D
Outlet
Box
A
9
WARNING: The tab in the ring must rest in the groove of
the hanger ball / downrod assembly (D). Failure to properly
seat the tab in the groove could cause damage to the wiring.
Please contact 1-855-HD-HAMPTON for further assistance.
A
F
HAMPTONBAY.COM