Sony STR-DA3500ES Operating Instructions Manual page 93

Setting the speakers in zone 2
When the speakers in zone 2 are connected to
the SPEAKERS SURROUND BACK
terminals of the receiver (page 91), make the
setting so that the sound selected in zone 2 is
output from the speakers connected to the
SPEAKERS SURROUND BACK terminals.
RETURN/
EXIT O
1
Press GUI MODE repeatedly to
select "GUI ON".
The GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press V/v repeatedly to select
"Settings", then press
3
Press V/v repeatedly to select
"Speaker", then press
4
Press V/v to select "Speaker
Pattern", then press
Select the speaker pattern that has no
surround back speakers.
5
Press RETURN/EXIT O.
6
Press V/v repeatedly to select
"Sur Back Assign", then press
.
7
Press V/v repeatedly to select
"ZONE2", then press
Setting audio/video output
signals to the zone 2/zone 3
GUI
MODE
,
V/v/B/b
1
Press GUI MODE repeatedly to
select "GUI ON".
MENU
The GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press V/v repeatedly to select
"Settings", then press
3
Press V/v repeatedly to select
"Multi Zone", then press
4
Press V/v to select the zone to
or b.
which you want to output
audio/video signals, then press
or b.
"Main" (this receiver) is always selected.
If you do not change the setting, proceed
.
to step 6.
.
.
continued
GUI
MODE
,
V/v/B/b
MENU
or b.
.
US
93