Sony STR-DA3500ES Operating Instructions Manual page 35

In the video input/output conversion table classified by the menu
settings
For details on "Resolution" menu setting, see "Settings for the video (Video settings menu)"
(page 57) and on operating, see "Converting analog video input signals" (page 96).
"Resolution"
menu setting
Input signals
DIRECT Component video
Video
AUTO (initial Component video
setting)
Video
480i/576i Component video
Video
480p/576p Component video
Video
720p, 1080i Component video
Video
1080p Component video
Video
a : Video signals are converted and output through the video converter.
f : The same type of signal as that of the input signal is output. Video signals are not converted.
X : Video signals are not output.
a)
The resolution is set automatically, depending on the connected TV.
b)
When the TV is connected to jacks other than the HDMI jacks, 480i/576i signals are output when
"Resolution" is set to "AUTO".
c)
480p/576p signals are output even if 480i/576i is set.
d)
Video signals without copyright protection are output based on the settings menu. Video signals with
copyright protection are output as 480p.
Notes
• Video signals are not output from the COMPONENT VIDEO MONITOR OUT or MONITOR VIDEO OUT
jacks when the TV, etc., is connected to the HDMI OUT jack.
• If you select a resolution that the connected TV does not support in the "Resolution" menu, the images from
the TV cannot be output correctly.
• Converted HDMI image output signals do not support "x.v.Color (x.v.Colour)" and Deep Color (Deep
Colour).
Output from
HDMI OUT jack
X
X
a)
a
a)
a
c)
a
c)
a
a
a
a
a
a
a
COMPONENT MONITOR VIDEO
VIDEO MONITOR
OUT jacks
f
X
b)
a
b)
a
a
a
a
a
d)
a
d)
a
f
X
OUT jack
X
f
b)
a
b)
a
a
a
X
f
X
f
X
f
US
35