Table of Contents
Advertisement
5.
Product Overview
5.1 Overview
When in use, the pump should be plugged into a
permanent mains supply. The air cell pressure in
the mattress is regulated by an electronic control
unit, connected via umbilical tubes. Alternating
pressures within the air cells allow the mattress
to regularly reduce pressure and relieve skin
contact to aid blood and lymphatic flow to
vulnerable tissue.
The control unit is intended for continuous use.
The mattress and control unit are intended to be
positioned on compatible bed frames only.
When using the mattress without the pump, store
in a safe location and fasten the feed pipe to the
mattress using the retainer clips provided at the
foot end.
5.2 Mattress Features
•
High specification zoned foam mattress
providing additional support to vulnerable
areas
•
14 cells: 10 alternating support cells & 4
alternating high pressure area cells.
•
Multi stretch, waterproof vapor permeable
cover - suitable for cleaning with a higher
concentration of sodium hypochlorite
without compromising its protective
properties
•
Turnable static head section - switches
between firm and soft.
•
White inner substrate makes fluid ingress
easily identifiable.
•
Non-slip base
•
High frequency welded top cover
•
360° zip
•
Covered feed pipes
•
Castellated side formers to prolong
longevity when profiling
•
2 feedpipe retainer clips
Drive DeVilbiss Healthcare Ltd
5.3 Control Unit Features
•
Provides an air supply to the mattress
•
Rear bed hooks
•
Accessible rear filter
•
3 comfort levels available for a variety of
patient weights
•
1 in 2 alternating cycle
•
10 minute cycle time
•
20 minute timed static mode
•
Lock out function
•
Low Pressure Indicator (alarm and LED)
•
Power Failure Indicator (alarm and LED
Do not modify this equipment
without the authorisation of the
manufacturer.
|
Hybrid-Power
|
Instructions for use
|
2021-01 rev7
|
9
Advertisement
Table of Contents
