10.
Control Unit Functions
10.6 Lock Out
After 5 minutes of inactivity, the pump will lock
out it's functions. To unlock, press and hold the
Lock Out button (item 6 on the on the image
on page 15) for 3 seconds.
10.7 Alarm Mute
If a fault is detected, press the Alarm Mute
button to silence the audible alarm (item 7 on
the image on page 15). The alarm will silence
and the red LED will continue to flash until the
issue is resolved.
10.8 Control Unit Icons
16
|
Drive DeVilbiss Healthcare Ltd
On/Off Standby
Static
Alternating
Lock / Unlock
Alarm mute
Patient Comfort/Weight Settings
Alarm indicators
|
Hybrid-Power
|
Instructions for use
In the event of a power failure, the
control unit's functions will unlock
when restarted.
|
2021-01 rev7