Installing The Cabinets - Huawei APM30H Installation Manual

2 Installing the Cabinets

a
Installation the Cabinets on th
Cabinet dimensions and clearance re
600
Cabinet
> 300
Maximum
120°
1. Install the base.
Cast a concrete plinth.
The height of the concrete plinth must meet the heat-dis
The concrete plinth must be 200 mm higher than the gro
when the plinth is cast.
Mark the anchor points for the base. Mark the anchor points for the base.
516
434
600
unit: mm
Concrete plinth
I Install the expansion bolt assemblies. t ll th
M12×60 bolt
Spring washer 12
Flat washer 12
Expansion tube
40
600
Cabinet
> 800
19
352
i b lt bli
Rubber
mallet
he Base
equirements (unit: mm)
40
600
Cabinet
480
The values in the figure are not for the concrete plinth.
The recommended distance between the cabinets is
40 mm, and the maximum distance between the cabinets
is 150 mm.
If the Noise Reduction Module (NRM) is installed, the
di t distance between the cabinets is 150 mm. b t th
ssipation and waterproofing requirements of the cabinet.
ound, and the horizontal error must be within 5 mm
Use a hammer drill to drill holes. Use a hammer drill to drill holes. U U
°
90
Con ncrete
52-60 mm
plint th
Do n not use the hammer drill to drill
hole s on the concrete plinth through the holes on the base.
In th his way, the paint on the base may be damaged.
Remove the spring washer,
flat washer, and bolt.
6 6
> 60
> 300
bi t i 150
Φ16