Product Features; Restrictions And Requirements Regarding The Use Of The Product And Car Seat - Chicco Sirio 012 Instructions For Use Manual

2. PRODUCT FEATURES

• This child car seat is "Group 0+/1/2" approved
for the transportation of children from birth
up to 25 kg (approx. 0 to 6 years of age), and
conforms to European norm ECE R44/04.
• This approval is "Universal", which means that
the child car seat can be used on all types of
cars.
WARNING! "Universal" means that it is com-
patible with most, but not all car seats.
POSSIBLE INSTALLATION CONFIGURA-
TIONS
Group Installation
Isofix + system
1
Top Tether
0+, 1, 2
3-point seat belt
3-point seat belt +
2
Top Tether
IMPORTANT WARNING
HOW TO FIT THE GR. 0+/1/2 CHILD CAR
SEAT EXCLUSIVELY WITH 3 POINT - UNI-
VERSAL BELT
1. This is a "Universal" child restraint system. It is
approved according to Regulation No. 44/04
for general use in vehicles, and it will fit most,
but not all car seats.
2. A correct fit is likely if the vehicle manufac-
turer has declared that the vehicle is capable
of fitting a "Universal" child restraint for this
age group.
3. This child restraint device has been classi-
fied as "Universal" under more stringent con-
ditions than those that were applied to earlier
designs that do not display this notice.
4. It is only suitable for vehicles which feature a
3-point static or 3-point retractable seat belts
approved according to UN/ECE Regulation
No.16, or other equivalent standards.
5. In case of doubts, contact the manufacturer
of the restraint device or reseller.
HOW TO FIT THE GR. 1 CHILD CAR SEAT
WITH ISOFIX - UNIVERSAL SYSTEM
1. This is an ISOFIX child restraint device. It is
approved by the ECE R44/04 Standards for
use in vehicles equipped with ISOFIX safety
anchorage systems.
2. For use with the ISOFIX UNIVERSAL system,
it is essential to read the vehicle manual be-
fore fitting the child car seat. The manual will
show which cars seats are compatible with
the size class of the ISOFIX UNIVERSAL certi-
fied child car seat.
3. This child restraint device has been classi-
fied as "Universal" under more stringent con-
Type of
ditions than those that were applied to earlier
homologation
designs that do not display this notice.
4. The child mass group and ISOFIX size class
ISOFIX
UNIVERSAL for which the child restraint may be used are:
GROUP 1, class B1.
5. In case of doubts, contact the manufacturer
UNIVERSAL of the restraint device or reseller.
WARNING! When using ISOFIX, the attach-
ment of the lower anchorage systems is not
sufficient. It is also essential to attach the "Top
SEMI-UNIVERSAL
Tether" to the anchorage point made available
by the vehicle manufacturer.
HOW TO FIT THE GR. 2 CHILD CAR
SEAT WITH TOP TETHER AND 3 POINT -
SEMI-UNIVERSAL BELT
1. Installing the child car sear with Top Teth-
er and the 3-point belt the configuration is
Semi-Universal and is exclusively compatible
with the vehicles indicated in the specific "Ap-
proved vehicle list" booklet provided with the
product.
2. It is only suitable for vehicles which feature a
3-point static or 3-point retractable seat belts
approved according to UN/ECE Regulation
No.16, or other equivalent standards.
3. In case of doubts, contact the manufacturer
of the restraint device or reseller.
3. RESTRICTIONS AND REQUIREMENTS
WARNING! Strictly complies with the follow-
ing restrictions and requirements for use con-
cerning the product and car seat: safety will
25
REGARDING THE USE OF THE PRODUCT
AND CAR SEAT