Creating Mylifter Groups; To Create A Locked Group - Garage Smart Basic MyLifter Installation And Operation Manual

You will want to leave a little bit of slack in the cable to make it easier to remove
the item from the lifter frame.
5. Tap the Set Low button (
An alert is displayed asking, "Are you sure you want to set the smart low at this
position?"
6. Tap SET to set the smart low position.
After the smart high and low points are set, simply tap the Smart Lift (
the Smart Lower (

Creating MyLifter Groups

The Create Group screen lets you create Locked Groups and Flex Groups. A Flex
Group lets you control multiple lifters simultaneously, but also gives you the freedom
to operate each lifter in the group individually if you need too. For example, if you have
installed two or more
lower all the bikes attached to each lifter at the same time, or you can raise or lower
each set of bikes individually.
Use a Locked Group when multiple lifters are required to lift or lower a single item.
The Locked Group ensures that all lifters in the group lift and lower items at the same
time and at the same speed. For example, the
requires two MyLifter units to lift large and oddly-shaped items. In order to keep the
load balanced as the item is lifted, the two MyLifter units need to be locked together so
they can work together as one.
Before you create a group

To create a Locked Group:

1. On the Home screen in the MyLifter app, tap Create Group in the lower left-
hand corner.
2. On the Create Group screen, tap Locked Group.
) to set your smart low point.
) buttons to raise and lower items at a single touch.
Garage Smart Multi-Bike Lifters, a Flex Group lets you lift and
Garage Smart Universal XL HD Lifter
) or