Garage Smart Basic MyLifter Installation And Operation Manual page 21

When the Status light blinks green, the lifter is paired with your app.
On the Available Lifters screen, your newly paired lifter is displayed with its
MAC (media access control) address as the default name.
5. Tap in the upper left-hand corner to go to the Home screen.
6. On the Home screen, tap Edit in the upper right-hand corner of the screen.
The button name changes from Edit to Exit and the app enters Edit Mode. In
Edit Mode you can rename the lifter or delete it if you need to.
7. Tap the pencil icon to rename the lifter and then tap OK.