Safe SC 810 User Manual page 4

Slide the preferred Locking Tab
into the Mounting Plate (G) and
then attach the Lock.
30s
24h
4
Hold the assembled unit around
the thickness of one door, with
the Lock facing towards you.
Check that in this position, the
door can still close properly.
Remove the protective layer to
expose the adhesive on the Locking
Tab, and close the door firmly for 30
seconds. Remove the Lock, so that
both doors can be closed, and leave
for 24 hours before first use.
UK
Option B:
Where the cabinet is open with
no support behind the doors
Attach the Lock (A) to the Top
Fix Locking Tab (B). The Locking
Tab slides in to the back of the
Lock and is attached/released by
squeezing the two buttons on
the Lock together.
Hold the assembled Lock and
Locking Tab around the thick-
ness of one of the doors, with
the Lock facing towards you,
pushed against the front of the
cupboard door, and the adhesive
of the Locking Tab facing up.
Remove the protective layer
to expose the adhesive on the
Locking Tab. Shut the door and
slide the Lock up until the Locking
Tab adheres to the top of the
cabinet.