COOL WAVE ™ 20S
ACCESSORIES
OPTIONS / ACCESSORIES
Field Installed Options/Accessories
Arclink Cables
K1543-8, -25, -50, -100 - An Arclink cable is used to communicate
between the Power Wave Welder, the Cool Wave
™
20S and the wire
feeder. Available lengths include 8', 25', 50', and 100'.
Coolant Hoses
Only the specified coolant hoses should be used between the
Cool Wave™ 20S and the Magnum PRO Water-Cooled Robotic Torch.
K4544-7 M-F Water Hose Kit 7 Ft
K4544-25 M-F Water Hose Kit 25 Ft
These hoses may be daisy-chained to form longer lengths
Coolants
KP4159-1 Low Conductivity Coolant - Sold in 1 gallon containers.
For use only in sub freezing applications.
Use 50-50 mix of coolant and water for freezing protection down to
9°F (-13°C).
C-1