Wasp WDI9600 Quick Reference Manual page 35

CLEANING PROCEDURE
Exterior surfaces and scan windows exposed to spills,
smudges or debris accumulation require periodic cleaning
to ensure best performance during scanning operations.
Follow the procedures described in this instruction sheet
to keep your Wasp device in good operating condition.
WARNING: Be sure to turn off power and unplug
the device from electrical outlet before cleaning.
CAUTION: DO NOT use abrasive pads or cleaning
agents.
Common Cleaning Solutions
The cleaners and disinfectants listed below are
recommended for use on Wasp Disinfectant-Ready
Enclosures:
PRODUCT
Sani-Cloth® HB,
Sani-Cloth® Plus,
Super Sani-Cloth®
Hepacide Quat II
Alcohol Wipes
CaviWipes™
Virex® 256
Formula 409® Glass and
Surface Cleaner
Windex® Blue
Clorox® Bleach;
Clorox Healthcare Bleach
Germicidal Cleaner
Hydrogen Peroxide
ProSpray™ Wipes
(Disinfectant towelettes}
100% Gentle dish soap and
water
Quaternary Ammonium Chloride solution
Virucidal disinfectant cleaner
70% Isopropyl Alcohol
www.waspbarcode.com
lsopropanol 10-20%; Ethylene Glycol
Monobutyl Ether 1-5%
n-Alkyl Dimethyl Benzyl Ammonium
Chloride; Didecyl Dimethyl Ammonium
Chloride
n-Alkyl Dimethyl Benzyl Ammonium
Chloride; n-Propoxypropanol
lsopropyl Alcohol
Sodium Hypochlorite;
Sodium Hydroxide
3%
0.647% o-phenylphenol;
0.070% o-benzyl-p-chlorophenol
CHEMICAL CONTENT
QUICK REFERENCE GUIDE
Cleaning Procedure
31