Table of Contents
Advertisement
Starting Regulations
Always check that any imminently dangerous conditions have been eliminated before using the machine. Ensure all
guarding is present & the operator is fully aware of the operations of the machine
Always ensure the pins lock the PTO shaft yoke ends onto the spline shafts on both the tractor and the
implement. An unlocked shaft could slip out of position, causing notable mechanical damage and serious
injury to both operator and bystanders.
Operating the machine
The machine is designed to operate at 540 RPM. Ensure tractor PTO output is set at 540 RPM.
1.
Hitch the machine as outlined. Ensure bystanders are clear from the machine & cannot be hit with debris
expelled from the machine.
2.
Raise the Parking Stand and lock it in the upper position.
3.
Attach PTO shaft to the machine.
4.
Check PTO shaft is fully engaged on tractor PTO splines.
5.
Remove the Transport Locking Pin as previously described.
7.
Set the machine to a desired position by hydraulic control or use tractor linkage controls.
8.
After clearing the vicinity of bystanders, begin mowing.
The operational range of the machine is 140 degrees.
10
www.major-equipment.com
Horizontal
Position
Advertisement
Table of Contents
