Machine Set Up - Major Verge Operator's Manual & Parts List

Machine Set up

Hydraulic Ram Set Up Instructions
1. Fit hydraulic quick fi ts to Tractor Spool.
2. Remove the Transport Locking Pin.
Transport
Position
Locking Pin
Carry Arm
Ram
Body Ram
Mowing
Position
In order to operate the Body Ram remove the Locking Pin
3. Lift machine & power hydraulics to move body into mowing position.
4. Place spool in neutral position.
5. Tighten lower link stabilizer bars to ensure machine is tight on linkage & ensure that linkage bars are positioned to
have machine slightly forward when in mowing position.
Correctly set up with stabilisers tightened up Incorrectly set up with loose stabilisers
6. When operating, the machine should be perpendicular or slightly forward to the direction of travel.
8
www.major-equipment.com