Application Scenarios - Huawei UPS5000-H User Manual

UPS5000-H-(1200 kVA-1600 kVA)
User Manual (100 kVA Power Modules)
Green
●
●
●
Intelligent
The iPower fault warning function is supported. If a battery, capacitor, fan, or any
other key component fails, a warning is generated to prevent the fault from
escalating.
Safe
●
●
●
●

2.3 Application Scenarios

The UPS5000-H is suitable for power systems in various indoor scenarios,
including large-sized data centers or communications centers, equipment rooms of
large-sized enterprises, equipment rooms of financial systems, industrial
automated equipment, and scheduling centers.
Table 2-1 Typical UPS configurations
Configuration
Single UPS
Issue 05 (2021-10-13)
Space is efficiently used. The UPS saves space for placing more IT equipment
and reduces the footprint by 50% compared with traditional solutions of
combining cabinets.
The power density of power modules is the highest in the industry.
High efficiency is ensured even with a low load rate. If the load rate is
extremely low, the intelligent rotation hibernation technology ensures
redundancy and improves the UPS efficiency.
UPS power and control modules use redundant design. No single-point fault
occurs.
The product supports a wide input voltage range to adapt to poor power
grids.
The UPS has an output power factor (PF) of 1.0, which is suitable for linear
and non-linear loads with a PF greater than 0.5. This allows the UPS to
connect to more loads and reduces customer investments.
The UPS passes reliability tests which focus on high temperature, high
humidity, and dust adaptation. The impact of environment on the UPS
reliability is reduced.
Application Scenario
Supplies power to common loads.
Copyright © Huawei Technologies Co., Ltd.
2 Product Overview
Description
-
17