Siemens SIMATIC RF166C Operating Instructions Manual page 118

Hide thumbs Also See for SIMATIC RF166C:
Table of Contents

Advertisement

Programming via OPC UA
9.3 OPC UA events
Table 9- 26
Data type
Description
Possible values
Table 9- 27
Data type
Description
Possible values
Table 9- 28
Data type
Description
Possible values
118
DeviceName
String
DisplayName of the read point from which the event comes.
This Property is inherited from "AutoIdDiagnosisEvent". The
BrowseName of the read point is supplied via the standard prop-
erty "SourceName" of "BaseEvent".
Example:
Readpoint_11
Client
String
Client interface via which the last transponder access or the last
command on this read point took place.
Command
String
Command that was executed during the last transponder access
operation.
Depending on the client interface used:
PROFIBUS (Ident profile):
PB: Access via PROFIBUS
EIP: Access via EtherNet/IP
OPCUA: Access via OPC UA
WBM: Access via WBM
INVENTORY
WRITE-ID
KILL-TAG
LOCK-TAG-BANK
PHYSICAL-READ
PHYSICAL-WRITE
FORMAT
TAG-STATUS
GET
PUT
NEXT
Operating Instructions, 12/2019, C79000-G8976-C578-01
PROFIBUS (FB 45):
WRITE
READ
INIT
MDS_STATUS
SIMATIC RF166C

Advertisement

Table of Contents
loading

Table of Contents