Gentner Audio Perfect Video APV200-IP Installation & Operation Manual page 65

OPERATION • ADVANCED CONFIGURATION
IP Address Method
Select this option to set the IP addressing method.
User Entered
Select this option to manually enter the assigned IP address for this
mode.
IP Address
Enter the assigned IP address for this node
(i.e., 000.000.000.000).
Subnet Mask
Enter the assigned subnet mask IP address for this
node (i.e., 000.000.000.000).
Default
Enter the assigned IP address for this node
Gateway
(i.e., 000.000.000.000).
Automatic DHCP (Dynamic Host Control Protocol)
Select this option to allow the network server to automatically assign
this node's IP addresses.
Web User Name
Select this option to enter a Web User Name for an Ethernet
connection. This is case sensitive. Refer to page 33 for Name Entry
instructions.
Web Password
Select this option to enter a Web Password for an Ethernet connection.
This is case sensitive. Refer to page 33 for Name Entry instructions.
TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
Figure 57. Ethernet/IP Screen
NOTE: You must reset or
restart the APV200-IP to
enable any changes.
63