Gentner Audio Perfect Video APV200-IP Installation & Operation Manual page 56

54
Camera Port
Mode
Select this option to set the camera type that is attached to the
CAMERA CONTROL jack on the rear panel. This port defaults to a Sony
camera, but may also be used for data.
Sony Camera
Select this option for use with Sony PTZ cameras
(default)
with a VISCA IN control port.
Canon camera
Select this option for use with Canon VCC series
PTZ cameras with an RS232 control port.
Panasonic
Select this option for use with Panasonic PTZ
camera
cameras with a Camera Control control port.
VCR Type 1
Select this option for use with a VCR equipped with
a Type 1 control port.
Debug
Select this option to obtain debugging logs using a
PC and HyperTerminal.
Data
Select this option for data collaboration using
Microsoft's NetMeeting or the API.
Null Modem
Select this option for a pass-through data pipe.
Test
Reserved for factory testing.
Baud Rate
Select this option to set the rate in Kilobits per second (Kbps) the data
will flow through the camera control port. Consult the device
manufacturer's documentation for the proper selection.
300
1200
2400
Flow Control
Select this option to choose the data flow control method. Consult the
device manufacturer's documentation for the proper selection.
None
No flow control will be applied.
(default)
X-on/X-off
Software flow control will be applied.
RTS/CTS
Hardware flow control will be applied.
TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
OPERATION • DATA PORT CONFIGURATION
4800
9600 (default)
19200