30
OPERATION • MANUAL DIALING
Performing an Interface Loopback
This configuration will verify the V.35 interface and the APV200-IP's
functional operation.
Step 1. Select Manual Dial.
Step 2. Select the appropriate call type (for example: 6 channel BOND)
in the Call Type submenu.
Step 3. Enter the string **##1 in the Prefix submenu.
Step 4. Press DIAL.
Figure 32. Manual Dial Screen
The APV200-IP will loop back the number of channels you have
requested. Mute your microphone to avoid receiving your own audio.
The loopback call will stay connected until terminated by pressing the
END button.
A loopback call should not be used for demonstration purposes. This is
only for testing the functionality of the APV200-IP.
TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760