OPERATION • AUDIO CONFIGURATION
Advanced Audio
Select this option to configure or make changes to advanced audio
options such as:
Line out source
Volume buttons
Input mic level
Input line level
Line Out Source
Select this option to configure the source of the line audio that will be
sent to the AUDIO OUT jack on the rear panel. This option is applicable
when recording to a VCR or using an external line audio system. The
selections are:
Remote
Only the received audio from the remote location
(default)
will be sent to the AUDIO OUT jack.
Remote w/mic
Audio from the remote location will be mixed with
the local microphone audio and will be sent to the
AUDIO OUT jack.
Remote w/line
Audio from the remote location will be mixed with
the local line audio and will be sent to the AUDIO
OUT jack.
TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
Output mix level
Speaker level
Line out level
Echo cancel
NOTE: The factory default
settings are recommended
for proper operation.
Figure 46. Advanced Audio Screen
43