Gentner Audio Perfect Video APV200-IP Installation & Operation Manual page 57

OPERATION • DATA PORT CONFIGURATION
Data Port
Select this option to configure the data port for data or control
applications.
Mode
Select this option to change the operating mode of the data port.
Sony camera
Select this option for use with Sony PTZ cameras
with a VISCA IN control port.
Canon camera
Select this option for use with Cannon VCC series
PTZ cameras with an RS232 control port.
Panasonic
Select this option for use with Panasonic PTZ
camera
cameras with a Camera Control control port.
VCR Type 1
Select this option for use with a VCR equipped with a
Type 1 control port.
Debug
Select this option to obtain debugging logs using a
PC and HyperTerminal
Data
Select this option for data collaboration using
(default)
Microsoft's NetMeeting or the API.
Null Modem
Select this option for a pass-through data pipe.
Test
Reserved for factory testing.
AP400
Select this option to control the Gentner AP400
audioconferencing system.
Baud Rate
Select this option to set the rate in Kilobits per second (Kbps) the data
will flow through the data port. Consult the device manufacturer's
documentation for the proper selection.
300
1200
2400
4800
9600
Flow Control
Select this option to choose the data flow control method. Consult the
device manufacturer's documentation for the proper selection.
None
No flow control will be applied.
X-on/X-off
Software flow control will be applied.
RTS/CTS
Hardware flow control will be applied.
(default)
TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
19200
28800
38400
57600
115200
55