Gentner Audio Perfect Video APV200-IP Installation & Operation Manual page 54

52
NOTE: You must reset or
restart the APV200-IP to
enable any changes.
NOTE: If Emulate Switch is
set to YES, you will not be
able to place or receive
calls on your ISDN lines.
Network Type
Select this option to choose the network type assigned by your ISDN
network provider. The network type assigned depends on your
geographical location.
N. ISDN 1
United States and Canada (also known as NI 1)
(default)
NTT Japan
Japan
ETSI
European; parts of France, most Asian countries, and
Australia (if using an On-ramp connection)
ITR6
Germany
VN4
France
Australia
Micronet connections
Custom
United States and Canada
Switch Vendor
Select this option to choose the switch vendor assigned by your ISDN
network provider. The switch vendor assigned depends on your
geographical location and network switching.
AT&T
United States and Canada (4ESS, 5ESS)
(default)
Nor. Telecom
United States and Canada (DMS 100)
Siemens
United States and Canada
Unknown
All countries except US and Canada
Advanced ISDN
This option is reserved for factory testing and special applications.
Contact Gentner Communications Technical Support for additional
information, if required.
Terminate Line
Factory default is No. This option is reserved for factory testing and
special applications.
Emulate Switch
Factory default is No. This option is reserved for factory testing and
special applications.
TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
OPERATION • ISDN CONFIGURATION