Gentner Audio Perfect Video APV200-IP Installation & Operation Manual page 50

48
Video Format
Select this option to set the video compression algorithm that will be
sent to the remote location. The selections are:
Auto
This setting instructs the APV200-IP to automatically adjust
(default)
to the best video quality available, as determined by the
capability exchange between the local and remote
systems. This is the recommended setting. However,
H.263 is the preferred selection for one- or two-channel
videoconference calls. H.261 will be selected for three- to
six-channel videoconference calls.
H.261
This video format standard is used for connections greater
than 128K and with systems that are not capable of the
standard H.263 for connection at 128K and below.
H.263
This video format standard is used for the best quality
video with connections at 128K and below. It is not
available for connections above 128K.
Video Inputs 1 and 2
This option sets the cable type for the camera or other device that is
connected to the VIDEO IN 1 or VIDEO IN 2 jack.
S-Video
Recommended for best video quality. Used with devices
(default)
that provide an S-Video signal and use mini-DIN cables
and connectors.
Composite
Used with devices that provide a composite video signal
and use RCA-type cables and connectors. Connection to
the APV200-IP is accomplished by using the S-Video to
Composite adapter cable in the accessory package.
Video Output Cable
This option sets the input cable type for the monitor or other device
connected to the VIDEO OUT jack on the rear panel. The jack on the
back of the monitor or other device may say "S-Video" or, for a
composite cable, "Video Out."
S-Video
Recommended for best video quality. Use with devices
(default)
that require an S-Video signal and use mini-DIN cables
and connectors.
Composite
Use with devices that require a composite video signal
and use RCA-type cables and connectors. Connection to
the APV200-IP is accomplished by using the S-Video to
Composite adapter cable in the accessory package.
TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
OPERATION • VIDEO CONFIGURATION