Gentner Audio Perfect Video APV200-IP Installation & Operation Manual page 63

OPERATION • ADVANCED CONFIGURATION
Password Protection
Select this option to enable or disable password protection.
On
Select this option to restrict configuration changes to the
holders of the password. Upon selecting this option, you will
enter a submenu where you will be prompted to enter your
new password and confirm it.
When enabled, a lock icon will appear in the title bar at the
top of each configuration menu screen. Temporary
configuration changes can be made, but the APV200-IP will
return to the password protected configuration when reset
or when the power is cycled, unless you return to this menu
and manually save the changes.
Off
Select this option to turn password protection Off. Upon
(default)
selecting this option, you will enter a submenu where you
will be prompted to enter your password and confirm it.
Edit Password
Select this option to change your current password.
Current Password
Enter your current password.
New Password
Enter the new password.
Retype New
Confirm your new password by re-entering the
Password
new password.
Redo Setup Genie
Select this option to display the Setup Genie on the next reset or restart
of the APV200-IP. All settings currently entered and saved will be
retained and displayed with the option to make changes.
Standby Mode
Select this option to set the monitor display mode when the APV200-IP
is not in an active call.
Local Video
Select this option to display the local camera or video
input device.
Active
Select this option to display the random, fade away
remote control screen saver.
Reset System
Select this option to perform a "warm" or "soft" restart of the APV200-IP.
TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
WARNING! REMEMBER
!
YOUR PASSWORD. This
password protection
feature does not include a "back
door" access or reset. You must
contact Gentner Technical Support
for further instructions.
61