Table of Contents
Advertisement
Digital Flow Monitor
3-Screen Display
Allows for the monitoring of remote lines
Centralized flow control
PFG300
Visualization of settings
The sub screen (label) shows the item
to be set.
PFG300
New
New
New
Always
displayed on
one screen
Easy screen switching
Main screen
Measured value
It is possible to
change the settings
while checking the
measured value.
Sub screen/Left side
Label
(Display item)
Simple 3-step setting
When the S button is pressed and the set value (P_1) is being displayed,
the set value (threshold value) can be set. When the S button is pressed
and the hysteresis (H_1) is being displayed, the hysteresis value can be set.
1
2
Push
Use the
button to adjust to the
set value.
7
PFG300
Existing model
Switches
between displays
(Current flow value)
The sub screen can be switched by pressing the up/down buttons.
Accumulated flow
Sub screen/Right side
Set value
(Threshold value)
* Either "Input of line name" or "Display OFF" can be added via the function settings.
3
Push
or
Setting completed
31
Series
p.
PF3A7
H
w
PFG300
PFG300
PFMB
PFG300
Normal
Set value
output
(Threshold value)
Window comparator mode
Normal Output
Set value
/Lo side
(Threshold value)
Reversed
Set value
Output/Lo side
(Threshold value)
Set value (Threshold value)
Hysteresis value
With a snap shot function for set value reading
and
Pressing the
buttons
simultaneously for a minimum of 1 second will
make the set value (threshold value) the same as
the current flow value.
Push
Release the buttons after
"---" is displayed on the
Setting start
right side sub screen.
For main line
PFMC
The flow rate of a flow
switch installed in a
distant location can be
confirmed!
Hysteresis mode
Reversed
Set value
Hysteresis
output
(Threshold value)
Normal Output
Set value
/Hi side
(Threshold value)
Reversed
Set value
Output/Hi side
(Threshold value)
Bottom value
Push
Setting completed
PFG300
Set hysteresis
value
Peak value
Advertisement
Table of Contents
