Download Print this page
Cornwell Tools CAT-3190AH Operating Instructions

Cornwell Tools CAT-3190AH Operating Instructions

Super duty, air hammer w/ vibration reduction

Advertisement

Quick Links

• Operating Instructions • Warning Information
Blows per minute . . . . . . . . . . . . . . . . . . 2,900
Shank Opening . . . . . . . . . . . . . . . . . . 0.401"
Bore Diameter . . . . . . . . . . . . . . . . . . . . . . 3/4"
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5/8"
Minimum Hose Size . . . . . . . . . . . . . . 3/8" I.D.
Air Inlet . . . . . . . . . . . . . . . . . . . . . 1/4"- 18NPT
Air Pressure . . . . . . . . . . . . . . . . . . . . . . . 90 PSI
Average Air Consumption . . . . . . . . 2.73 CFM
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . .3.8Lbs
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.6"
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
CAT-3190AH
• Parts Breakdown
SPECIFICATIONS
CAT-3190AH
1
Super Duty,
Air Hammer w/
Vibration
Reduction
AlwAYS reAd
inSTrucTionS
before uSing
power ToolS
AlwAYS weAr
SAfeTY goggleS
weAr heAring
proTecTion
Avoid
prolonged
expoSure To
vibrATion
Rev. 07/11/07

Advertisement

loading
Need help?

Need help?

Do you have a question about the CAT-3190AH and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Cornwell Tools CAT-3190AH

  • Page 1 Stroke......2-5/8" Minimum Hose Size ....3/8" I.D. CAT-3190AH Air Inlet ..... 1/4"- 18NPT Air Pressure .
  • Page 2 CAT-3190AH Super Duty Air Hammer with Vibration Reduction FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY • Slipping, tripping and/or falling while This Instruction Manual Contains Important Safety operating air tools can be a major cause of Information. serious injury or death. Be aware of excess hose Read THIS INSTRUCTION MaNUaL left on the walking or work surface. CaRefULLy aNd UNdeRSTaNd aLL • Keep body working stance balanced and firm. INfORMaTION BefORe OpeRaTINg Do not overreach when operating the tool.
  • Page 3 CAT-3190AH Super Duty Air Hammer with Vibration Reduction OPERATION Always place a chisel in the hammer and hold the Nipple tool down to the work before operating. Damage to the tool or the retainer may result if this precaution is not followed. The chisel retainers are not designed for complete safety against accidental release of cutters or ham- mers. To avoid injury, the throttle must never be depressed unless the chisel is held firmly against the work place. When tool is not in actual use, the chisel must be removed. During operation, safety goggles AIR SUPPLY should always be used to guard against flying rust and chips. When using tool, regulate the speed so Tools of this class operate on a wide range of air pres- that the chisel is not being driven out of the cylinder. sures. It is recommended that air pressure of these If piston is allowed to strike the cylinder wall, inter- tools measures 90 PSI at the tool while running free. nal damage will result. Higher pressure (over 90 psig; 6.2 bar) raises perfor- To change chisel, pull back on spring hook and insert mance beyond the rated capacity of the tool which chisel. Release spring hook. will shorten the tool’s life because of faster wear and could cause injury. To regulate air, turn air regulator knob out for maxi- mum air pressure and in for minimum. Always use clean, dry air. Dust, corrosive fumes and/or water in the air line will cause damage to the tool.
  • Page 4 CAT-3190AH Super Duty Air Hammer with Vibration Reduction Ref. # Item # DESCRIPTION Ref. # Item # DESCRIPTION 1 01 RS3190101 Housing 210 RS1735403 Seal 1 02 RS3190102 O-Ring 2 11 RS1735404 Bushing 1 03 RS3190103 Magazine 2 12 RS1735405...