Home Compliance - Verity Medical NeuroTrac MultiTENS Operator's Manual

Home Compliance

Lock Mode Function
A "concealed" Lock button is included in the NeuroTrac
allows the clinician to accurately monitor the "Home Compliance" of the patient
between appointments. Whenever you lock the device, it resumes or starts to record
the statistics of use. If the unit is not locked, the statistics are not stored in the memory.
You can lock the unit in two ways:
Press the concealed button and {L:T} or {L:P} will be flashing on the LCD, press B+
to select one of the options:
L:P - This will lock the selected programme and will not allow user to alter any
parameter, such as the programme number and time, programme type (Constant, Burst,
etc). Use this option if you want to keep the same settings through out a course.
L:T - This option will allow you to alter all the parameters during the course: pro-
gramme, time, etc. Use this option if you are an advanced user and you are allowed to
alter the parameters during the treatment.
The recorded statistics are the same for both {L:P} and {L:T} options.
Locking the Unit and recording statistics
Remove the battery cover and using the end of the lead wire, gently press on the con-
cealed lock button as shown in the diagram on page 7 until you hear a double bleep.
The lock symbol will appear on the LCD screen and {L:T} or {L:P} will be flashing.
Your unit will start recording the daily statistics. It is very important to set up the timer
and calendar correctly - see page 15.
Displaying Global Statistics
To display the global statistics, remove the battery cover and using the end of the
2mm dia pin press the concealed switch once and you will hear a single beep. On the
diagram below, the basic global statistics are displayed on the LCD: how many days
the unit was used, number of hours in total the unit was used and the average intensity
[m A] used.
When you have noted the information press the OFF/ON button to bring the unit back
to the Home position.
Total Number
of Days in
Use
Channel A
Average Milliamps
NeuroTrac MultiTENS Operation Manual
®
Total Number of
Hours in Use
14
Multi-TENS unit, which
®
Channel B
Average Milliamps