6.3. Fasten the seat belt
Warnings:
By using the three-point safety belt the head and torso injuries are limited, in case the electric
wheelchair comes in contact with the car;
After an accident has occurred, the electric wheelchair must be checked by your Excel dealer.
Use the safety belt as follows:
-
Place the belt on the pelvis at an angle between 30 ° and 75 °, the other section of the belt goes on
the torso and the shoulder;
-
The safety belt must be as tight as possible and may not be twisted;
-
Make sure armrests do not impede the safety belt, wheels, etc.;
When there is a work tray mounted to the electric wheelchair that does not meet the safety
requirements, you should do the following:
-
Remove and store the work tray separately in the vehicle;
-
Mounted to the electric wheelchair with shock absorbing material between the user and the work
tray.
-
To avoid injury in an accident, you must secure all accessories to the electric wheelchair or remove all
accessories from the electric wheelchair and store them in the vehicle in blankets or any other form
of padding.
35
Need help?
Do you have a question about the Airide B-Ace and is the answer not in the manual?