General Section - Viscount SYNTH-8 User Manual

GENERAL Section

The GENERAL menu contains the general parameters of
the Synth-8 which determine the operation of all the
sections it consists of.
To access this menu, place the cursor on the GENERAL
field in the EDIT SYNTH-8 screen (page 6) and press the
data entry dial.
Parameter name Description
Switch Activate / deactivate the module.
Values: OFF, ON
[ON/OFF]
Volume Level of the module generated signal.
[VOLUME] Values: between 0 and 127
Output Routing
Assign the module audio output.
Values:
 Main L-R: AUDIO OUT [MAIN L/MONO] and [MAIN R] connectors on the
 FX1: input of the EFFECTS section FX1
 FX2: input of the EFFECTS section FX2
 FX1+FX2: inputs of both FX1 and FX2 of the EFFECTS section
 Aux1 Mono: AUDIO OUT [AUX 1] connector on the rear panel (mono signal)
 Aux2 Mono: AUDIO OUT [AUX 2] connector on the rear panel (mono signal)
 Aux1-2: AUDIO OUT [AUX 1] and [AUX 2] connectors on the rear panel
Reverb Send Level of the audio signal generated by the module and sent to the Reverb
effect.
Values: between 0 and 127
NB
This parameter only works if the audio output selected through the Output
Routing parameter is MAIN L-R
Detune
Tuning of the sound generated by the module, expressed in hundredths of
semitone (or cent).
Values: between -50 and +50 semitone cents
Note Shift Module sound transposition (in semitones).
Values: between -48 and +48 half-tones
NB
When transposition is applied, the [
rear panel (stereo signal)
(stereo signal)
Sound
Module
Reverb
depends on FX Config
Output
Routing
] module Led is on.
EN - 7
Parameter editing
Master MAIN
EQ L-R
FX Out
FX1
Routing
FX Out
FX2
Routing
AUX1
AUX2
Synth-8 – User Manual