Viscount SYNTH-8 User Manual page 7

[▲] e [▼] / [PRESETS] buttons.
4
Using these buttons, you can select the group of 4 parameters adjusted by the [ASSIGN
1], [ASSIGN 2], [ASSIGN 3] and [ASSIGN 4] knobs. The adjustable parameters are the
serigraphed ones as indicated in point 6. By pressing these buttons it is possible to
select the row of the table that indicates the parameters currently assigned to the knobs,
the selected row is indicated by the LED on as indicated in point 5.
NB
Hold down the [▲] button for a while to access all the configuration parameters of the
-
selected section.
Hold down the [▼] / [PRESETS] button for a while to access the Preset library (see The
-
Synth Presets, page 18).
LEDs for displaying the parameters adjusted by the [ASSIGN] knobs.
5
These LEDs show the row of the parameter table (see point 6) selected with the [▲] and
[▼] / [PRESETS] buttons and therefore which parameters are currently adjusted by the
[ASSIGN 1], [ASSIGN 2], [ASSIGN 3] and [ASSIGN 4] knobs. For example, when the
first LED at the top left is lit, the parameters adjusted by the 4 knobs are:
[ASSIGN 1]: Osc1 Shape
-
[ASSIGN 2]: Osc1 Coarse
-
[ASSIGN 3]: Osc1 Fine
-
[ASSIGN 4]: Osc1 Level
-
NB
- Some rows of the parameter table have two LEDs, as in the case of Osc1-2 (or LFO1-2). In
this case the left Led indicates that it refers to the Osc1 (or LFO1) parameters, while the
right Led refers to the Osc2 (or LFO2) parameters.
- If none of the display LEDs are lit, the [ASSIGN 1], [ASSIGN 2], [ASSIGN 3], [ASSIGN 4]
knobs adjust the parameters assigned in the current Program (see Assign Section on page
18).
Table of parameters that can be adjusted with the [ASSIGN] knobs.
6
This table lists all the parameters that can be adjusted with the [ASSIGN 1], [ASSIGN 2],
[ASSIGN 3] and [ASSIGN 4] knobs. To select the parameters to be adjusted, refer to
points 4 and 5. For further information on the parameters, refer to the Parameter editing
section on page 6.
Synthesizer parameter adjustment knobs.
7
Knobs for adjusting the parameters selected with the [▲] and [▼] / [PRESETS] buttons
as shown in point 4 and 5.
EN - 5
Front panel
Synth-8 – User Manual