Osc 1 And Osc 2 Sections - Viscount SYNTH-8 User Manual

OSC 1 and OSC 2 sections

The Synth-8 has two oscillators per voice, each capable of
generating different waveforms. The SYNTH OSC1 and
SYNTH OSC2 menus contain the adjustment parameters
of the first and second oscillator respectively. These
parameters are common for both oscillators and are
described in the table below.
To access these menus, in the EDIT SYNTH-8 screen
(page 6) place the cursor on the OSC 1 or OSC 2 fields
and press the dial data entry.
NB
The table below shows all the parameters available for the OSC 1 and OSC 2 sections. The knob
or button that allows direct control from the panel is shown under the name of the parameter.
Parameter name Description
Osc1 Shape
Selection of the oscillator waveform.
Osc2 Shape Values:
 Sawtooth: sawtooth wave.
[ASSIGN 1]
 Alt Saw 1, Alt Saw 2: variants of the sawtooth waveform,
 Fat Saw 1, Fat Saw 2: double sawtooth wave, with two
 Triangle: triangular wave.
 Alt Triangle 1, Alt Triangle 2: variants of the triangular
 Fat Triangle 1, Fat Triangle 2: double triangular wave, with
 Pulse: pulse wave, with duty cycle at 50%.
 Pulse 60, Pulse 80, Pulse 95: pulse wave, with duty cycle at
 Fat Pulse 1, Fat Pulse 2: double pulse wave, with two different
Osc1 Coarse Tuning of the oscillator in semitones.
Osc2 Coarse Values: -24 to +24 semitones
[ASSIGN 2]
Osc1 Fine
Fine tuning of the oscillator in cents of a semitone.
Osc2 Fine Values: from -50 to +50 cents of a semitone
[ASSIGN 3]
Osc1 Level Signal level generated by the oscillator.
Osc2 Level Values: between 0 and 127
[ASSIGN 4]
based on phase shift with two different effect settings.
different detuning levels.
waveform, based on the shift of the phase with two different
effect settings.
two different levels of detuning.
60%, 80%, 95%.
detuning levels.
EN - 9
Parameter editing
Synth-8 – User Manual