Amp Env Section - Viscount SYNTH-8 User Manual

Parameter editing

AMP ENV section

With this section it is possible to adjust the temporal
evolution of the sound amplitude. The amplitude envelope
applicable to the Synth-8 is the classic ADSR, which is
made up of four phases over time: Attack, Decay, Sustain,
Release.
To access this menu, in the EDIT SYNTH-8 screen (page 6), place the cursor on the AMP
ENV field and press the data entry dial.
NB
The table below shows all the parameters available for the AMP ENV section. The knob or button
that allows direct control from the panel is shown under the name of the parameter.
Parameter name Description
Amp Attack Time taken for the signal to reach its maximum level after a key is pressed.
[ASSIGN 1] Values: between 0 and 127
Amp Decay Time required to reach the Sustain level after the maximum level has been
[ASSIGN 2] reached.
Values: between 0 and 127
Amp Sustain Sustain level, that is the level of the signal reached after the Decay phase.
[ASSIGN 3] Values: between 0 and 127
Amp Release
Time required for the signal level to reach zero after the key is released.
Values: between 0 and 127
[ASSIGN 4]
Amp VelAmt Modulation amount of the amplitude envelope controlled by the key velocity. At
high parameter values, the signal level is increased as you play harder.
Values: between 0 and 127
Synth-8 – User Manual
Level
Sustain
Level
Attack Decay
Time Time
key down
EN
- 12
Time
Release
Time
key up